Subtotal: €143.82
Waterlock for use with long exhaust hoses (4 metres and longer)
Thanks to increased spiral reinforcement and a more supple type of rubber, VETUS exhaust hoses are now even stronger, as well as more flexible. The increased flexibility cuts down valuable installation time across the whole size range.
The mentioned price is per meter
Type TC is made of reinforced black synthetic material, with a decorative stainless steel band. The exhaust hose can be fitted directly to this transom connection.
Non-rotating inlet and outlet connections
Combining the functions of a muffler and gooseneck saves installation time and space whilst maintaining the essential qualities of a good exhaust system. Both the sections and the hose connections of this model are fully rotatable, ensuring ease of installation.
Transom exhaust connection in EDPM rubber with a 2mm high gloss polished stainless steel trim ring. It can be mounted to the transom easily and flexibly. VETUS mufflers and goose necks with corresponding dimensions can be fitted directly.
For the connection of the exhaust hose, a plastic hose connector will be required.
360° revolving inlet connection which facilitates the installation
Waterlock suitable for exhaust hose with a 30 mm internal diameter.
Temperature Sensor for Vetus alarm instruments.
In some boats, the exhaust waterlock must be positioned so closely behind the engine’s exhaust manifold (this is especially true in the case of near-horizontal exhaust assemblies), that the injected cooling water does not always mix properly with the hot exhaust gases. This often results in the exhaust hose and/or the waterlock becoming overheated. Installation of a VETUS water mixer directly behind the exhaust manifold will overcome this problem.
A Vetus gooseneck raises the exhaust hose above the waterline, so that water cannot backfill the exhaust system. After the engine is stopped, all cooling water in the exhaust hose will run to the lowest point of the system, which is where the waterlock should be situated.
Air vent suitable hoses with internal diameters of ø 13, 19, 25 and 32 mm (½ ”, ¾ ”, 1” & 1¼ ”)