No products in the cart.
-
Vetus Gooseneck Type LT
A gooseneck raises the exhaust hose above the waterline, so that water cannot backfill the exhaust system. This plastic gooseneck is suitable for marine exhaust systems with water injection.
€222.30 – €225.90Vetus Gooseneck Type LT
€222.30 – €225.90 -
Vetus AIR VENT WITH VALVE or HOSE
Type V has a reliable pressure valve and is self-contained.
Type H has a hose connection to the outside of the hull. There is a constant bleed off of cooling water through this hose whilst the engine is running.
Both can be connected to hoses with internal diameters of ø 13, 19, 25 and 32 mm (½”, ¾”, 1” & 1¼” )
€87.55 – €107.95 -
Vetus Transom Exhaust Connect TRCR
Transom exhaust connection in EDPM rubber with a 2mm high gloss polished stainless steel trim ring. It can be mounted to the transom easily and flexibly. VETUS mufflers and goose necks with corresponding dimensions can be fitted directly.
For the connection of the exhaust hose, a plastic hose connector will be required.
€58.50 – €153.90Vetus Transom Exhaust Connect TRCR
€58.50 – €153.90 -
Vetus Hose Clamp Heavy Duty Type HDSLKL
Hose clamp Heavy Duty made of galvanized steel, bright passivated
€4.05 -
Vetus Hose Clamp Heavy Duty – Type HCHD
Heavy Duty AISI430 Steel hose clamp with hex bolt closure for high clamping pressures. Ideal for use with marine wet exhaust and raw water inlet applications.
€3.15 – €13.50Vetus Hose Clamp Heavy Duty – Type HCHD
€3.15 – €13.50 -
Vetus Exhaust Hoses
Thanks to increased spiral reinforcement and a more supple type of rubber, VETUS exhaust hoses are now even stronger, as well as more flexible. The increased flexibility cuts down valuable installation time across the whole size range.
The mentioned price is per meter
€23.40 – €180.00Vetus Exhaust Hoses
€23.40 – €180.00 -
Vetus S/STEEL Heavy Duty Hose Clamp
Heavy Duty AISI304 Stainless Steel hose clamp with hex bolt closure for high clamping pressures. Ideal for use with marine wet exhaust and raw water inlet applications.
€8.10 – €28.05Vetus S/STEEL Heavy Duty Hose Clamp
€8.10 – €28.05 -
Vetus Muffler Type DEMPMP
Its construction causes almost no resistance to the flow of the exhaust gases. Also, this muffler creates additional mixing of the water inside the exhaust line which results in even better noise reduction.
€88.40 – €257.55Vetus Muffler Type DEMPMP
€88.40 – €257.55 -
Vetus Plastic Muffler Type MV
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a Waterlock and/or gooseneck. This model is a Plastic muffler with a check valve, and it achieves a tremendous reduction of exhaust noise.
€432.90 – €610.30Vetus Plastic Muffler Type MV
€432.90 – €610.30 -
Vetus Plastic Muffler , Type MF
The muffler model MF is perfect for fast boats with powerful engines and is more suitable when the exhaust hose has to run low down in the boat. In this case the transom outlet does not need to be lower than the outlet of the engine exhaust manifold. The muffler will also function as a waterlock when the engine is stopped.
€319.60Vetus Plastic Muffler , Type MF
€319.60 -
Vetus Water/Gas Mixer For Exhaust Hose
In some boats, the exhaust waterlock must be positioned so closely behind the engine’s exhaust manifold (this is especially true in the case of near-horizontal exhaust assemblies), that the injected cooling water does not always mix properly with the hot exhaust gases. This often results in the exhaust hose and/or the waterlock becoming overheated. Installation of a VETUS water mixer directly behind the exhaust manifold will overcome this problem.
€100.80 -
Vetus Exhaust Temperature Alarm w/out Sensor (Black)
Designed for water injected exhaust systems. It provides a visual and an audible alarm when the temperature inside the exhaust hose or the muffler exceeds an acceptable level.
€65.45 – €79.05Vetus Exhaust Temperature Alarm w/out Sensor (Black)
€65.45 – €79.05