No products in the cart.
-
Vetus WATERLOCK /MUFFLER TYPE NLP
The NLP Waterlocks are of dual-stage construction, featuring upper and lower chambers with a horizontal partition plate and a riser tube through the centre. Since the top chamber may be rotated through 360° and both the inlet and the outlet connectors can rotate through 360°, installation of the exhaust assembly even in confined engine spaces is greatly simplified.
€188.10 – €269.10Vetus WATERLOCK /MUFFLER TYPE NLP
€188.10 – €269.10 -
VETUS PLAST.WATERLOCK TYPE MG
The model MG is designed to make even the most awkward installation possible. The outlet connection at the top will rotate through 360° and the inlet connection is at an angle of 45° upward.
€593.10 – €637.20VETUS PLAST.WATERLOCK TYPE MG
€593.10 – €637.20 -
Vetus Exhaust Gas / Water Separator
Gas/water separator for marine engines and generator sets. Separates cooling water from exhaust gases and also function as gooseneck. Great sound-deadening capacities by reducing the exhaust noise and draining the cooling water below the waterline, so preventing the characteristic splashing sound.
€251.10 -
Vetus TRANSOM EXHAUST CONNECTING WITH CHECK VALVE (Type TRCPV)
Transom exhaust connection with integrated rubber check valve. High-quality synthetic materials.
The exhaust hose can be fitted directly to this transom connection.
€35.10 – €72.90Vetus TRANSOM EXHAUST CONNECTING WITH CHECK VALVE (Type TRCPV)
€35.10 – €72.90 -
TRANSOM EXHAUST CON.S/S W/VALVE Type TRCSV
Transom exhaust connection with an integrated check valve. High-quality stainless steel (AISI 316) with high gloss polished cover to conceal fixings.
The exhaust hose can be fitted directly to this transom connection.
€74.70 – €305.10TRANSOM EXHAUST CON.S/S W/VALVE Type TRCSV
€74.70 – €305.10 -
Vetus PLASTIC WATERLOCK Type LSG
The ideal solution for boats sailing in rough waters, without the engine running.
3600 rotating inlet & outlet stubs
€358.40 – €366.30Vetus PLASTIC WATERLOCK Type LSG
€358.40 – €366.30 -
Vetus Gooseneck Type LT
A gooseneck raises the exhaust hose above the waterline, so that water cannot backfill the exhaust system. This plastic gooseneck is suitable for marine exhaust systems with water injection.
€222.30 – €225.90Vetus Gooseneck Type LT
€222.30 – €225.90 -
Vetus S/STEEL Heavy Duty Hose Clamp
Heavy Duty AISI304 Stainless Steel hose clamp with hex bolt closure for high clamping pressures. Ideal for use with marine wet exhaust and raw water inlet applications.
€8.10 – €28.05Vetus S/STEEL Heavy Duty Hose Clamp
€8.10 – €28.05 -
Vetus Muffler Type DEMPMP
Its construction causes almost no resistance to the flow of the exhaust gases. Also, this muffler creates additional mixing of the water inside the exhaust line which results in even better noise reduction.
€88.40 – €257.55Vetus Muffler Type DEMPMP
€88.40 – €257.55 -
Vetus Plastic Muffler Type MV
Specially developed for fast craft with powerful engines, where very often there is no space available for installation of a Waterlock and/or gooseneck. This model is a Plastic muffler with a check valve, and it achieves a tremendous reduction of exhaust noise.
€432.90 – €610.30Vetus Plastic Muffler Type MV
€432.90 – €610.30 -
Vetus Water/Gas Mixer For Exhaust Hose
In some boats, the exhaust waterlock must be positioned so closely behind the engine’s exhaust manifold (this is especially true in the case of near-horizontal exhaust assemblies), that the injected cooling water does not always mix properly with the hot exhaust gases. This often results in the exhaust hose and/or the waterlock becoming overheated. Installation of a VETUS water mixer directly behind the exhaust manifold will overcome this problem.
€100.80 -
Vetus Exhaust Temperature Alarm w/out Sensor (Black)
Designed for water injected exhaust systems. It provides a visual and an audible alarm when the temperature inside the exhaust hose or the muffler exceeds an acceptable level.
€65.45 – €79.05Vetus Exhaust Temperature Alarm w/out Sensor (Black)
€65.45 – €79.05