Subtotal: €40.00
The muffler model MF is perfect for fast boats with powerful engines and is more suitable when the exhaust hose has to run low down in the boat. In this case the transom outlet does not need to be lower than the outlet of the engine exhaust manifold. The muffler will also function as a waterlock when the engine is stopped.
Its construction causes almost no resistance to the flow of the exhaust gases. Also, this muffler creates additional mixing of the water inside the exhaust line which results in even better noise reduction.
The VETUS waterlock/muffler consists of two rotatable components. The hose connections are also fully rotatable, ensuring simple and time-saving installation in a wide range of applications.
This combined exhaust component is designed for horizontal installation.
Gas/water separator for marine engines and generator sets. Separates cooling water from exhaust gases and also function as gooseneck. Great sound-deadening capacities by reducing the exhaust noise and draining the cooling water below the waterline, so preventing the characteristic splashing sound.
A gooseneck raises the exhaust hose above the waterline, so that water cannot backfill the exhaust system. This plastic gooseneck is suitable for marine exhaust systems with water injection.
Combining the functions of a muffler and gooseneck saves installation time and space whilst maintaining the essential qualities of a good exhaust system. Both the sections and the hose connections of this model are fully rotatable, ensuring ease of installation.
A Vetus gooseneck raises the exhaust hose above the waterline, so that water cannot backfill the exhaust system. After the engine is stopped, all cooling water in the exhaust hose will run to the lowest point of the system, which is where the waterlock should be situated.
Transom exhaust connection with an integrated check valve. High-quality stainless steel (AISI 316) with high gloss polished cover to conceal fixings.
The exhaust hose can be fitted directly to this transom connection.
Transom exhaust connection in EDPM rubber with a 2mm high gloss polished stainless steel trim ring. It can be mounted to the transom easily and flexibly. VETUS mufflers and goose necks with corresponding dimensions can be fitted directly.
For the connection of the exhaust hose, a plastic hose connector will be required.
Type TC is made of reinforced black synthetic material, with a decorative stainless steel band. The exhaust hose can be fitted directly to this transom connection.
Transom exhaust connection with integrated rubber check valve. High-quality synthetic materials.
The exhaust hose can be fitted directly to this transom connection.