Subtotal: €203.50
PP Varnish Extra, is a two-component varnish based on alkyd resin/isocyanate that combines fast dry time with excellent impact and abrasion resistance. A Recoat time as short as 3 hours make PP Varnish Extra ideal for situations where high build is required in a short time. It can be used on all types of interior and exterior wood as an insulation coat, sealer, or filling coat for one-component or two-component synthetic or polyester based varnish systems.
A strong two-component finishing filler on epoxy resins. Very fine and shrink free. Provides a very smooth surface.
A highly advanced self polishing antifouling for all types of ships sailing between 5 and 30 knots. Suitable for both fresh and salt water areas. By the movement of the boat, the underwater area constantly exposes a fresh surface with bio-active materials and avoids unnecessary build-up of antifouling layers. This antifouling can also be applied directly on top existing polishing antifoulings after thorough scrubbing with a stiff brush and fresh water hosing down and on a vinyl and chlorinated rubber antifoulings after wet sanding.
A traditional one-component knifing filler based on alkyd resins. Suitable for levelling of small irregularities in one-component paint systems for wood or steel above the waterline.
A two-component primer and/or intercoat with outstanding adhesion properties and durability. Can be recoated with many one- and two-component products. Suitable for use above and below the waterline in an epoxy system or directly on bare fiberglass.
A fast drying, two-component filler suitable for small repairs on steel and fibreglass. Can be applied in thick layers. Before use, mix well with 2-4% of the reactor from the tube . Recoatable with all Epifanes one- and two component products.
Anti-corrosive two-component primer with excellent adhesion on various surfaces. High filling , quick building and easy to sand.
A high gloss two-component yacht paint with excellent outdoor durability and weather resistance. Scratch resistant and very long gloss retention. Provides a perfect flow and easy application by brush, roller or spray.
Fast evaporating thinner for spray applications of Epifanes Polyurethane Yacht coatings.
A hard, one-component, high gloss finishing paint. Provides superior covering and filling, long lasting weather durability and high gloss retention. Offers rapid initial curing and provides (after through hardening) the application ease of a traditional enamel with the hard durability of a urethane resin base.
A bituminous primer reinforced with aluminium providing a tough impermeable film. For the underwater protection of wood steel or aluminium. For touch ups or full treatment prior to the application of antifouling paints. May be overcoated with most types of antifouling.
A traditional impregnating oil, based on linseed oil and alkyd resin. Protects teakwood from discoloration caused by weather or pollutants. Ideal for the maintenance of teak decks. May be applied wet-on-wet until. Well degrease wood with Epifanes Spraythinner for Paint & Varnish or mineral spirits and allow to evaporate. Apply with a wide brush, Poly-Brush or lint free cloth until saturation. Remove excess material. Attention: due to the possible risk of self ignition, after use always keep cloths soaked in water