No products in the cart.
-
RM69 Toilet Base Unit 503
Spare Bottom Unit with Plug
RM69 Part NO. 503
€53.55RM69 Toilet Base Unit 503
€53.55 -
RM69 609.13 Cutter
Grinder Knife at the bottom of the pump
PART NO. 609.13
€16.47RM69 609.13 Cutter
€16.47 -
-
RM517.N Outlet Valve Gasket
Original seal for hand pump of the on-board toilet by RM 69. Part number: 517.N.
€15.53RM517.N Outlet Valve Gasket
€15.53 -
Check Valve Non Return 38mm
The RM69 Check Valve ensures that the toilet will not overflow
Model NO. 825
Hose Connection: 38mm
€23.80Check Valve Non Return 38mm
€23.80 -
Split Up Valve with Stopper
3-way split up valve for installation directly on the manual RM69 Marine Toilets. Comes with a stopper
Hose Connection: 38mm
Material: Plastic
Model No. 804
€96.39Split Up Valve with Stopper
€96.39 -
Two-Way Split-Up Valve
The three-way valve is installed directly on the manual hand pump and can be operated manually to pump either overboard or into the waste water tank. Hose connection size: 1 1/2 inches (38 mm).
MODEL NO. 802
€45.77Two-Way Split-Up Valve
€45.77 -
Raske Electric Pump (Conversion) For RM69 Type 201 12V
With an electric conversion unit a RM manual toilet can be converted into a full electric toilet. The conversion unit is a compact model with a self-priming double acting pump for below or above waterline installation. The pump is equipped with a cutter, which cuts the waste before it is discharged through the outlet line. Operation is simple. The switch on the pump must be lightly pressed down to activate the electric pump. Freshwater is coming in and the waste will be discharged through the cutter. All parts are made of corrosion resistant materials. Lasting pump construction.
€329.40 -
SEALOCK Pump for Marine Toilets
The in- and outlet of the RM SEALOCK toilet can, contrary to other marine toilets, completely locked, if the toilet is not being used. This gives extra security against incoming water, especially when the toilet is installed below the waterline. All parts are made of corrosion resistant materials.
€76.86 -
Raske Waste Water Pump Type 310 (12V)
Electric self priming bilge/waste pump suitable for pumping polluted liquids, such as toilet waste, bilge water, shower water and the contents of waste tanks. Membrane type pump with an 1½” in- and outlet, big enough to let pass solids such as toilet paper and tissues. Maximum suction height is 3 meters; maximum delivery height is 5 meters. Capacity 40 ltr./min. The RM electric bilge pump can be installed in any position. All parts are corrosion resistant. Can be supplied with white or black housing and in 12 or 24 volt.
€393.44 -
Raske Marine 830 Connection Set 40/60 Ltr W/Water Tank
Raske Marine 830 Connection Set for 40/60 Ltr W/Water Tank.
€45.52 -
Raske Bilge Pump Senior B
Strong self priming bilge pump, hand operated. Large capacity for emptying waste tanks and bilges. Suitable for wall mounting through bulkhead and for installation below deck. Can be installed in any position. Black pump housing, nitril oil resistant membrane and valves.
€80.92Raske Bilge Pump Senior B
€80.92